Reverse osmosis pure water equipment, reverse osmosis pretreatment

  Pretreatment often consists of quartz sand filter, activated carbon filter, precision filter, main purpose is to remove sediment, rust, colloid substances contained in the raw water, suspended solids, pigment and peculiar smell, biochemical, organic matter to reduce the residual ammonia water and harmful substances such as pesticide pollution. If the raw water of calcium and magnesium ions content is higher, also need to increase the water softening device, main purpose is to protect the latter's reverse osmosis membrane is not affected by large particle damage, so as to prolong the service life of the membrane.
  Chongqing equipment tell you reverse osmosis water treatment equipment is around and organized into a set of reverse osmosis membrane water treatment system, a complete set of reverse osmosis system respectively by the preprocessing part, reverse osmosis host (membrane filtration), reprocessing parts and common parts cleaning system.
  Post-processing part is mainly to reverse osmosis host making pure water for further processing, if the follow-up process after ion exchange or electric ion (EDI) equipment, industrial ultrapure water can be produced, if it is to use on the commercial straight drinking water process, often connect rear sterilization device, such as can paper receiving outside the sterilization lamp or ozone generator, so that the water can be directly drinkable.